Table of Contents
Advertisement
MAINTENANCE
If the torque value is low, replace the pin with a new
one.
T1: Torque (Nm)
T2: Turning angle (degree)
REMARK
The torque value increases gradually and reaches to
the maximum at approximately 45 °, and it decreases
gradually after 45 °.
7.
Clean the mounting surface of tooth (2).
8.
Fit new tooth (2) to the adapter.
9.
Insert pin (1), rotate the shaft of the pin clockwise by 90 °
with socket wrench to lock the pin, and install the tooth.
10. Check that the shaft of pin (1) is locked securely.
Be careful of the direction of brim of the shaft.
(A) Free state: The brim of shaft is sideways.
(B) Lock state: The brim of shaft is upward.
11. After operating several hours, check that the pin does not
come out.
METHOD FOR CHECKING WINDOW WASHER FLUID LEVEL, ADDING FLUID
1.
Open the battery box cover (1) on the left side of the ma-
chine.
MAINTENANCE PROCEDURE
4-35
Advertisement
Chapters
Table of Contents
