Komatsu WA200-8 Operation & Maintenance Manual page 131

OPERATION
When a password for restriction of use has been set, the
password input screen is displayed.
Input the password for restriction of use by using the nu-
meric keypad, then press ENTER switch (1).
REMARK
For the setting, changing, or canceling the password, ask
your Komatsu distributor.
2.
The screen changes to Maintenance Due Time Reset
screen.
When ENTER switch (1) is pressed, the following reconfir-
mation screen is displayed.
To cancel, press RETURN switch (2).
3.
On the reconfirmation screen shown in the figure, when
ENTER switch (1) is pressed again, the remaining time is
reset and the screen returns to the "Maintenance" menu
screen.
To cancel, press RETURN switch (2).
REMARK
If the remaining time and the replacement interval are the
same, the remaining time cannot be reset.
MONITOR SETTINGS
Each item of "Monitor Setting" menu (F) is to make settings for
the machine monitor.
REAR VIEW MONITOR SETTING
This is used to set the rearview monitor.
EXPLANATION OF COMPONENTS
3-67