Method For Setting Pcs - Komatsu WA200-8 Operation & Maintenance Manual

PCS(PROPORTIONAL CONTROL SWITCH)
ATTACHMENT OIL FLOW LEVEL
The attachment oil flow level indicates the maximum flow level
which has been set.
It indicates the level 0 to 8 according to the attachment flow
rate level which has been set. It is displayed in green (A) in the
normal state, and in orange (B) under the detent control.

METHOD FOR SETTING PCS

1.
Press the menu switch (1) and enter the setting mode.
2.
Select "Attachment Setting" on "Machine Setting and Infor-
mation" menu, and press ENTER switch (2).
If the flow rate mode and the maximum flow rate are set al-
ready, select an arbitrary setting, and the setting is comple-
ted.
If you press the menu switch (1) at this time, you can
change the setting of the selected attachment.
You can save up to 5 settings.
6-16
ATTACHMENTS AND OPTIONS