Komatsu WA200-8 Operation & Maintenance Manual page 94

EXPLANATION OF COMPONENTS
(9) Headlamp (high beam) pilot lamp
(10) 2-stage low idling pilot lamp
(11) Clearance lamp pilot lamp
(12) Work equipment lock pilot lamp
(13) Shift lever position display
(14) Steering low oil pressure caution lamp (if equip-
ped)
(15) Secondary HST travel switch pilot lamp
Meter display
(21) Engine tachometer
(22) Speedometer
(23) R.H. meter (Select the fuel consumption gauge,
service meter, odometer, or clock.)
(24) L.H. meter (Select the service meter, odometer, or
clock.)
(25) HST oil temperature gauge
* At place (20), 3 types of pilot lamp are prepared.
REMARK
• The default of R.H. meter is the fuel consumption gauge.
• The default of L.H. meter is the service meter.
PILOT DISPLAY
The pilot display consists of the pilot lamps to check the actuation of each function.
When the starting switch is in ON position, the pilot lamps light up when the display items are functioning.
For some pilot lamps, pop-up (A) is displayed on the screen
when the setting is changed.
TURN SIGNAL PILOT LAMP
The turn signal pilot lamp flashes synchronously with the turn
signal lamp, when it is turned on.
3-30
(16) Preheating pilot lamp
(17) Fan reverse rotation display
(18) Secondary steering pilot lamp (if equipped)
(19) Aftertreatment devices regeneration display
(20) ECO guidance
(20) DEF low level guidance
(20) Engine stop operation during the aftertreatment
devices regeneration guidance
(26) Engine coolant temperature gauge
(27) ECO gauge
(28) DEF level gauge
(29) Fuel gauge
(30) Variable speed display
OPERATION