Komatsu WA200-8 Operation & Maintenance Manual page 143

OPERATION
When the starting switch is ON and "SKIP" is selected, "****" is
displayed in the column of "Operator ID" on the "Monitor Set-
ting" menu screen.
1.
Select "Operator ID" on the "Monitor Setting" menu screen,
then ENTER switch (1) for 1 second.
2.
The "Operator ID Change" screen is displayed.
• Input the already registered ID on the "Operator ID
Change" screen and press ENTER switch (1). Then,
the identified ID can be changed.
A message is displayed below and the screen returns
to the "Monitor Setting" menu screen.
On the "Monitor Setting" menu screen, the inputted ID
is displayed in the column of "Operator ID".
EXPLANATION OF COMPONENTS
3-79