Table of Contents
Advertisement
OPERATION
When the S mode is actuated, tires will not easily slip and operation on a very slippery ground such as a snow
removal work can be performed easily, because an appropriate driving force is obtained.
Moreover, the machine may start smoothly and a sudden start at forward travel may not occur.
REMARK
•
If you select the most suitable maximum rim pull for the work condition by using the traction control switch
and with the traction level selection function, you may increase the work efficiency and decrease the slip-
ping of tires.
•
If the rim pull is too large for the work condition, the boom may not easily be raised and tires may easily
slip. If tires frequently slip, the work efficiency may decrease and the service life of the tires is shortened.
•
If the rim pull is too small for the work condition, the bucket cannot be sufficiently pushed into the target
material of loading and the work efficiency may decrease.
EXPLANATION OF COMPONENTS
3-95
Advertisement
Chapters
Table of Contents
