Komatsu WA200-8 Operation & Maintenance Manual page 237

OPERATION
METHOD FOR STOPPING MACHINE
k k
• Stop the machine gradually. Avoid a sudden stop.
• Do not park the machine on a slope. If it is unavoida-
ble to park the machine on a slope, place the machine
at a right angle to the slope face, lower the bucket to
the ground, and then chock the tires to prevent the
machine from moving.
• If the multifunction mono-lever is touched by accident,
the work equipment or machine may move suddenly,
and it may cause a serious accident. Before leaving
the operator's seat, be sure to lock the work equip-
ment by pressing the work equipment lock switch (the
pilot lamp lights up).
• Keep depressing the brake pedal until the parking
brake pilot lamp lights up on the machine monitor
even when the parking brake switch has been turned
on.
NOTICE
Never use the parking brake switch to brake the machine when the machine is traveling except in an
emergency. Stop the machine, and then apply the parking brake.
1.
Release the accelerator pedal (1), then depress the brake
pedal (2) to stop the machine.
WARNING
MACHINE OPERATIONS AND CONTROLS
3-173