Table of Contents
Advertisement
Dataflower
Sound Mode
In this menu you can activate the sound-controlled operation mode.
01) Press the UP/DOWN buttons to select one of the following 2 options:
02) Press the ENTER button to confirm the selection.
Sensitivity Settings
In this menu you can adjust the sensitivity of the built-in microphone.
01) Press the UP/DOWN buttons to increase or decrease the sensitivity of the built-in microphone. The
adjustment range is 000–100, from low to high sensitivity.
02) Press the ENTER button to confirm the selection.
DMX Fail
In this menu you can determine the behavior of the device in case there is no DMX signal.
01) Press the UP/DOWN buttons to select one of the following 3 options:
02) Press the ENTER button to confirm the selection.
Display LEDs
In this menu you can select whether the display LEDs will remain on or will turn off after 15 seconds of
inactivity.
01) Press the UP/DOWN buttons to select one of the following 2 options:
Product code: 43168
Sound-controlled operation mode is activated.
On:
The device will run the selected built-in
program reacting to the beat of the music
Off:
Sound-controlled operation mode is disabled
Blind:
The device will black out the light output
The device will use the last properly received
Last:
DMX signal
The device will continue working as a stand-
Master:
alone device
On:
The LED display will remain on
25
Advertisement
Table of Contents
