Page 1
DA-U-48 All rights reserved. ON/OFF VOLUME INPUT MUTE Any improvement and changes to specifications, FOLDER SONG FM-RADIO FADE design and this manual, may be made at any time without prior notice. R-MANUAL R-SEMI AUTO R-SEMI AUTO PAGE CURTAIN CURTAIN SCREEN R-AUTO CHANNEL1-48 SHOW...
Table of Contents Introduction........................1 Key Features........................1 Control Panel and Functions..................2 Connector Configuration....................3 Operation Guide....................4~12 1. On/Off.......................4 2. SCENE......................5 2.1. Playing a Scene..................5 2.2. Editing a Scene..................5 2.3. Saving a Scene..................5 3. SHOW.......................6 3.1. Playing a Show...................6 3.2. Recording a Show..................6 3.3.
Appendix II Introduction Congratulations and thank you for purchasing DA-U-48, a hybrid LED controller with Table 2 touch interface. It is multi-function, reliable, compact and easy to operate. KEYs FUNCTION ON/OFF Power on/off DA-U-48. Key Features To switch from FM mode to MP3 mode. To switch from MP3 mode to FM mode.
Control Panel and Functions Appendix II The DA-U-48 can also be controlled by IR controller. Table 2(on the next page) details the function of DA-U-48 RC. ON/OFF VOLUME INPUT MUTE ON/OFF FOLDER SONG FM-RADIO FADE PRESET R-MANUAL R-SEMI AUTO R-SEMI AUTO PAGE CURTAIN SCREEN...
Appendix I Connector Configuration The DA-U-48 features one group DMX input and two groups DMX output with 4-Pin The DA-U-48 is controlled by DMX 512 Protocol. Table 1 describes the DMX channel mappings. terminal connector, the configuration of the terminal as following. Table 1 DMX IN DMX OUT...
Operation Guide Specification 1. ON/OFF Power Supply................DC 12~24V (4W min.) Housing....................Polycarbonate Make sure your DA-U-48 has connected with the suitable power source prior to operate the device. DMX In....................4 Pin Terminal DMX Out..................4 Pin Terminal(2pcs) The indicator of the POWER button lights up and the device is powered on while To Panel......................
Operation Guide Operation Guide 2. SCENE 9. ONLINE OPERATION 2.1 Playing a Scene If you want to connect multiple DA-U-48s,or to connect one or multiple triggering panels, you are required to connect all the DMX IN ports in parallel. Press the corresponding button of S1~S8 may raise the scene which has been stored In the state without external DMX input, the online function is available.
Operation Guide Operation Guide 3. SHOW 8. SETUP Press the SHOW/PRESET button, the LED indicators of channel button1~8 light 8.1 Edit function Lock/Unlock with blue (which is the same as the color of the SHOW/PRESET button), means the channel button 1~8 switches to the function button of SHOW1~8. 8.1.1 Edit Lock In SHOW mode, press and hold on PAGE button, meanwhile rotate the touch Playing a Show...
Operation Guide Operation Guide 7.3 Preset OFF Time 4. PRESET Press the SHOW/PRESET button, the LED indicators of channel button 1~8 light 7.3.1 Setting Preset OFF Time with blue-white (which is the same as the color of the SHOW/PRESET button), To set OFF Time for Preset s, simply take the following steps:...
Operation Guide Operation Guide 6. AMPLIFIER 7. TIMING Press the AMP button, the SCENE button 1~4 light with blue which is the same as 7.1 Time Setup the color of the AMP button, means the SCENE button 1~4 switches to its second In PRESET mode, press PAGE button and the UP &...
Need help?
Do you have a question about the Domotion DA-U-48 and is the answer not in the manual?
Questions and answers