Table of Contents
Advertisement
Dataflower
Control Panel
●
Use the MENU button to exit the current submenu, to return to the main menu and to scroll through
the main menu.
●
Use the UP/DOWN buttons to navigate through the menus or to increase/decrease numeric values.
●
Use the ENTER button to open the desired menu, to confirm your choice or to set the currently
selected value.
Start-up
Upon start-up the display will show the following screen:
Immediately afterwards the display will show the start screen. The start screen provides information about
the current control mode of the device:
Note:
If no button is pressed, after 5 seconds of inactivity the display will return to the start screen
and after 10 more seconds it will turn off. Press any button to turn the display on. See 6.6.9.
Display LEDs on pages 25–26 for more information.
Product code: 43168
A) 4-digit LED display
B)
ENTER button
C) DOWN button
D) UP button
E)
MENU button
Fig. 12
DMX control mode with DMX starting address 001
A dot at the bottom right corner of the display indicates that DMX
signal is present.
The device is not receiving DMX signal. The settings in the DMX fail
menu apply. See 6.6.8. DMX Fail on page 25 for more information.
21
Advertisement
Table of Contents
