Table of Contents
Advertisement
Dataflower
Main Menu Options
The main menu has the following options:
DMX address
DMX channel mode
Slave mode
Master mode
Show mode
Sound-controlled mode
Sensitivity settings
DMX fail
Press the UP/DOWN buttons or the MENU button to navigate through the main menu.
02) Press the ENTER button to open the submenus.
Note:
To open the offset mode menu, refer to 6.6.15. Offset Mode on page 27.
DMX Address
In this menu you can set the DMX starting address of the device.
01) Press the UP/DOWN buttons to select the DMX starting address. The selection range is 001–512.
Press the ENTER button to confirm the selection.
DMX Channel Mode
In this menu you can select the DMX channel mode.
01) Press the UP/DOWN buttons to select the desired DMX channel mode. There are 3 options available:
02) Press the ENTER button to confirm the selection.
Product code: 43168
Display LEDs
Display settings
Manual control
Temperature
Fixture hours
Version
Offset mode
2 channels
5 channels
7 channel
23
Advertisement
Table of Contents
