Introduction; Before Using The Product; Intended Use; Product Lifespan - SHOWTEC Dataflower User Manual

Table of Contents

Advertisement

Dataflower
1.

Introduction

Before Using the Product

Important
Read and follow the instructions in this user manual before installing, operating or
servicing this product.
The manufacturer will not accept liability for any resulting damages caused by the non-observance of
this manual.
After unpacking, check the contents of the box. If any parts are missing or damaged, contact your
Highlite International dealer.
Your shipment includes:
Showtec Dataflower
Schuko to IEC (C13) power cable
User manual

Intended Use

This device is intended for professional use as a stage light effect. It is suitable only for indoor installation.
This device is not suitable for households and for general lighting.
Any other use, not mentioned under intended use, is regarded as non-intended and incorrect use.

Product Lifespan

This device is not designed for permanent operation. Disconnect the device from the electrical power
supply when the device is not in operation. This will reduce the wear and will improve the device's
lifespan.

LEDs Lifespan

The light output of the LEDs gradually decreases over time (lumen depreciation). High operating
temperatures contribute to this process. You can extend the lifespan of the LEDs by providing adequate
ventilation and operating the LEDs at the lowest possible brightness.

Text Conventions

Throughout the user manual the following text conventions are used:
Buttons:
References:
0–255:
Notes:
Product code: 43168
All buttons are in bold lettering, for example "Press the UP/DOWN buttons"
References to chapters and parts of the device are in bold lettering, for example:
"Refer to 2. Safety", "turn the adjustment screw (02)"
Defines a range of values
Note: (in bold lettering) is followed by useful information or tips
4
Fig. 01

Advertisement

Table of Contents
loading

This manual is also suitable for:

43168

Table of Contents