Table of Contents
Advertisement
6.3.
Control Panel
•
•
Use the MODE button to exit the current submenu, to return to the Main Menu and to return to the start
screen.
•
•
Use the UP/DOWN buttons to navigate through the menus or to increase/decrease numeric values.
•
•
Use the SET button to open the desired menu, to confirm your choice or to set the currently selected value
6.4.
Start-up
After the device is connected to power supply, the device will perform a reset. During the reset the display
shows a splash screen with the firmware version, the temperature and the humidity percentage of the
mainboard of the controller (MC):
After the reset is completed, the device is ready to be operated. The display shows the start screen. The start
screen provides information about the highest temperature of the LEDs of the pod (L), the highest temperature
of the mainboard and the highest humidity of the mainboard (P) and the selected mode. Normally the L value
shows the temperature, if something is wrong it shows X:
c
Figure 11
A)
A) OLED display
B)
B) DOWN touch button
C)
C) UP touch button
D)
D) SET touch button
E)
E) MODE touch button
21
Stage Blinder FLEX Blaze
Product code: 30785
Advertisement
Table of Contents
