Control Panel; Start-Up - SHOWTEC 43552 User Manual

Spectral PC 1200Z IP65
02) Set the DMX starting address of the device in the DMX Address menu. See 6.6.2. DMX Address on
page 24 for more information.
03) Select the DMX channel mode in the DMX Configuration menu. See 6.6.6. Personality on page 25 for
more information. See 6.7. DMX Channels on pages 30–33 for complete overview of all DMX
channels.

Control Panel

● Use the MENU button to open the main menu or to exit the current submenu and return to the main
menu.
● Use the UP/DOWN buttons to navigate through the menus or to increase/decrease numeric values.
● Use the ENTER button to open the desired menu, to confirm your choice or to set the currently
selected value.

Start-up

Upon start-up the display shows a splash screen with the Showtec logo.
Afterwards the display shows the start screen. The start screen provides information about the
temperature of the LEDs, the DMX starting address of the device, and the selected DMX channel mode:
Press the ENTER button or the UP/DOWN buttons to enter the main menu.
Note:
If no button is pressed, after 25 seconds of inactivity the display will turn off. Press any button to turn the
display on. If the display lock is turned on, enter the password to unlock the display. The password is
pressing the UP/DOWN buttons in the following order: UP, DOWN, UP, DOWN.
Product code: 43552
A) LED DISPLAY
B) DOWN button
C) UP button
D) ENTER button
E) MENU button
Fig. 14
20