Parameter Setting; Specific Operations On Setting Parameters; Example For Setting Parameters - Texi Catenaccio Operation Manual

TEXI Catenaccio operation manual

12. Parameter Setting

12-1. Specific Operations on Setting Parameters

1) When Sewing LED is off, user can press
the parameters.
(After user presses
that the Max speed of the No.1 parameter is 3000rpm)
2) User can use
number of parameter.
3) By pressing
parameter number and turn on the Sewing LED
4) By using &
corresponding value of the parameter
5) By pressing , user can make the parameters return to the initial value.
6) By pressing
parameter number selection status.
7) Pressing will end the parameter setting mode and let system return to ordinary status.

12-2. Example for Setting Parameters

(1). Setting of Max Sewing Speed
Emp.: Set the upper limitation of sewing speed to 1800rpm
1. When the Sewing LED is off, user can press
display the content of Parameter No.1. Parameter No.1
displays the Max speed of sewing machine.
2. When the No.1 parameter is displayed; user can press
to turn on the Sewing LED. Then the content
of No.1 parameter is displayed in the screen.
3. User can use
"1800"
4. Press to save the value and turn off the Sewing LED.
5. Press to return to the ordinary status.
to set
, the displayed 1.30 means
& to change the
, user can adjust the wanted
, user can change the
, user can save the changed content and turn off the Sewing LED. After that, the machine returns to
& to set the speed to
to
34