Set P Pattern & C Pattern; Use Pattern Key（ ）For Sewing - Texi Catenaccio Operation Manual

TEXI Catenaccio operation manual
10. Set P Pattern & C Pattern
10-1. Use Pattern Key（
The saved patterns (No.1~200) can be registered on P1~P50. It is possible to change and register the scale rate, Max
speed limitation and sewing position. With the rolling window of pattern, user can also register patterns and has access to
the pattern from P1~P25 at a time.
For selecting P6~P25, user can use the combinations of
the below table at his sewing.
P-No. Selection Key
P1 P1
P2 P2
P3 P3
P4 P4
P5 P5
P6 P1+P2
P7 P1+P3
(1). Registration on Pattern Key
Exp：Register pattern No.3 to P2, X scale rate: 50%; Y scale rate: 80%; Max speed limitation: 2000 rpm, pattern position:
0.5mm to the right and 1mm to the front.
1. Turn on the power, press
be off at this moment) to have access to Mode Setting
(Setting of Storage Switch).
2. Use &
pattern
3. Press to have access to the pattern storage
mode.
4. Press to select the stored P-No.
This selection can also be done by using
& .
5. Use to select
Use &
P-No. Selection Key
P8 P1+P4
P9 P1+P5
P10 P2+P3
P11 P2+P4
P12 P2+P5
P13 P3+P4
P14 P3+P5
(the sewing LED shall
to display the storage mode of
.
to set pattern number.
）for Sewing
P-No. Selection Key
P15 P4 +P5
P16 P1+P2+P3
P17 P1+P2+P4
P18 P1+P2+P5
P19 P1+P3+P4
P20 P1+P3+P5
P21 P1+P4+P5
(simultaneous pressing) shown in
P-No. Selection Key
P22 P2+P3+P4
P23 P2+P3+P5
P24 P2+P4+P5
P25 P3+P4+P5
21