TEXI Catenaccio operation manual
[3]INSTALLATION
1. Installing the electrical box
2. Attaching the connecting rod
3. Installing the head support rod
4. Installing and connecting the power switch
Install the electrical box on the underside of the table at
the location illustrated using round-head bolt (1), plain
washer (2), spring washer (3) and nut (4) supplied with
the machine
FIX connecting rod (1) to installing hole B of pedal lever
(2) with nut (3). When connecting rod (1) is installed in
installing hole A, the depressing stroke of the pedal is
increased.
Drive head support rod (1) in hole (2) in the machine
table.
Fix power switch (1) under the machine table with
screws (2).
Fix the cable with staples (3) supplied with the machine
as accessories in accordance with the forms of use.
8