Installing The Thread Stand; Operation Of The Sewing Machine; Lubrication - Texi Catenaccio Operation Manual

TEXI Catenaccio operation manual
13. Managing the cord
［4］OPERATION OF THE SEWING MACHINE

1. Lubrication

1. Do not lubricate to the places other than the oil tank and the hook of Caution 2 below.
Trouble of components will be caused.
2. When using the sewing machine for the first time or after an extended period of disuse use the machine
after lubricating a small amount of oil to the hook portion.(Refer to2.Adjusting the needle-to-shuttle
relation of [7] MAINTENANCE.
Turn of the power before starting the work so as to prevent accidents caused by
abrupt start of the sewing machine
The line frame in the accessory box should be installed
in Table.
Check that the place between lower line Band upper line
A is filled with oil . Fill there with oil using the oiler supplied
with the machine as accessories when oil is short.
* The oil tank which is filled with oil is only for lubricating
to the hook portion.It is possible to reduce the oil amount
when the number of rotation used is low and the oil
amount in the hook portion is excessive. (Refer to 8.
Amount of oil supplied to hen kook of [7] maintenance)
12