Bottom Thread Counter; Pause - Texi Catenaccio Operation Manual

TEXI Catenaccio operation manual

8. Bottom Thread Counter

The counters are set as Production Counter (Adding method) at the time of delivery. However, if it is used as the Bottom
Thread Counter (subtracting method), the value of parameter No.18 shall be set at 1.

9. Pause

After user set the value of No.31 parameter at 1,
1) If user presses or depresses the reverse gear of pedal, the sewing machine will stop and display the error No.50.
2) The following are the three available operations after the pause:
Press the Start Switch to start the sewing.
Press and perform the thread-trimming. After that, use
switch to start sewing.
Press and trim the thread. After that, press
1. Press to select
2. Then press .
3. After that, press
of times that can be sewn with a bobbin.
4. Finish of sewing in each time will cause the counter
to count down by one.
5. After the machine finishes the set times of sewing, the
monitor will shine for hinting the user.
6. Replace the bottom thread and press
the value of counter will restore to the set value
Repeat the steps from 4. to 6).
or the reverse gear of pedal can be used as the pause key.
&
again to return to the origin.
.
& to set number
to adjust the position and then press start
again. Then
20