Adjusting The Stitch Length; Restore Factory Setting - Texi ART AUTO User Manual

8.3 Adjusting the stitch length

To adjust length of the stitch press button "S" (pic.1), on the panel will be shown value of current stitch length (pic.2). This value
can be modified by icons "+" which increases the stitch length, or "-" to reduce stitch length.
The biggest stitch length is 5 for Art Auto and 7 for Art Auto H.
If stitch length is set on it's biggest value and "+" key will be pressed again you will enter to Design pattern function (D1, D2,
D3....D9).
Note: when you want to use Design patterns function, pls remember to close the front and back bartacking function.

8.4 Restore factory setting

Press button " P " for few seconds to enter the parameter P-79 and adjust the data to "3" by pressing the icon "+" or "-". Press
button " S " to confirm, on the panel will be shown "NO", press icon "+" or "-" to change it to "YES". Press button " S " again. Now
the restore factory setting parameter is confirmed.
EN TEXI ART AUTO operation manual
38