Test Presser Origin Sensor - Texi Catenaccio Operation Manual

TEXI Catenaccio operation manual
11-6. CP-6 Test Presser Origin Sensor
Display the step motion operation of presser motor, operation of origin search and status of presser origin sensor.
(1). Operation
1. Preparation
Firstly, user can press
catching; at this time, the sewing LED is on.
2. Operations
If the user presses
sensor is normal. If not, please adjust the position of the presser sensor.
After user presses
above figure. Press
to have access to CP-6. Then user can press
for 6 ~ 8 times, and then the display on screen changes to "01" from "00", it means the presser
By pressing
position:
1. Presser up position
2. Presser down position (lowering position during the operation of pedal);
3. Thread-trimming position
4. Presser down position (lowering position after thread-trimming)
5. Thread-string position
, the relating parts on the machine will do the 5-step cyclic action in the sequence shown in
to quit that mode.
Status of presser origin sensor: "0" or "1"
, user can drive the presser motor to each pointed
to search the origin of thread-
Use to drive the
、
thread-trimming motor at +/-
direction with the step of pulses.
32