Serial And I/O Cable Connection - Cardinal 212 Series Installation, Technical And Operation Manual

Serial and I/O Cable Connection

8200-M639-O1 Rev D 09/14
The 212/212X I/O cable connection (user specified) may be connected to
the internal serial RS-232 or 20mA current loop terminals to be
connected to a printer to record weight and associated data or to a
remote display or even to a computer for transmission of weight data.
When connected to the appropriate serial communication terminals, the
weight data may be transmitted on demand (pressing the PRINT key or
on receipt of a command from a computer).
Serial and I/O Connector
Figure No.10
Figure No. 10 above is the Serial and I/O connector as viewed from the
bottom of the indicator.
IMPORTANT! Figure No. 10 is for reference only. Connections
to the Serial and I/O connector require Cardinal Part Number
"AGSIO", Serial/DIO Mating Connector with 12 ft cable. See
Figure No. 11
The pin number descriptions are typical connections. The connector can

be configured with various Input/Output functions depending on the
requirements of the operation.
212/212X Installation & Technical
Pin No.
1
2
3
USER SPECIFIED
4
USER SPECIFIED
5
6
PWC2/ACCEPT
7
USER SPECIFIED
8
I/O Dust Cover
CPN 6610-2126

Description
PWC1/UNDER
GROSS
PRINT
GND
Page 31