Print Tab Settings - Cardinal 212 Series Installation, Technical And Operation Manual

Print Tab Settings

Print (Print?)
Port=
TIME=
(Time Print Location)
8200-M639-O1 Rev D 09/14
Print Print?
With ( ) displayed, press the ENTER key. The display will
change to no. To skip configuring Print Tab Settings and proceed to the
FSPAn? menu, press the ENTER key again. To configure Print Tab
Settings, press the numeric key 1/YES and then the ENTER key. After
pressing the ENTER key the display will change to Port=.
The general format for the input is A =
YY.XX where A is the character identifying
the data printed, YY is the number of lines
down and XX is the number of columns to
the right.
NOTE: Enter 00 in either the YY
or XX location to disable the
data from printing.
(Select Port for Printing)
Press the ENTER key to show the current setting. If the setting displayed
is acceptable, press the ENTER key again to save it. Otherwise, use the
numeric keys to enter a new setting and then press the ENTER key to
save it. Allowable settings are: 1 or 2.
NOTE: Although either port can be used for the printer port, it is
recommended to use the bi-directional port 1 with a bi-directional
cable.
Press the ENTER key to show the current setting for the location of time
printing. If the setting displayed is acceptable, press the ENTER key
again to save it. Otherwise, use the numeric keys to enter a new location
and then press ENTER to save it.
212/212X Installation & Technical
Page 85