Access Control - Ricoh Aficio MP161F Operating Instructions Manual

Access Control

This can be specified by the network administrator.
The machine can control TCP/IP access.
Limit the IP addresses from which access is possible by specifying the access
control range.
For example, if you specify the access control range as [192.168.15.16]-
[192.168.15.20], the client PC addresses from which access is possible will be from
192.168.15.16 to 192.168.15.20.
Limitation
❒ Using access control, you can limit access involving LPR, RCP/RSH, FTP,
IPP, DIPRINT, Web Image Monitor, SmartDeviceMonitor for Client or Desk-
TopBinder. You cannot limit the Monitoring of SmartDeviceMonitor for Cli-
ent, when using the SNMPv1 monitoring.
❒ You cannot limit access involving telnet, or SmartDeviceMonitor for Admin,
when using the SNMPv1 monitoring.
A
Open a Web Image Monitor.
B
Enter "http://(machine's-address)/" in the address bar to access the machine.
C
Log onto the machine.
The network administrator can log on using the appropriate login user name
and login password.
D
Click [Configuration], click [Security], and then click [Access Control].
The [Access Control] page appears.
E
To specify the IPv4 Address, in [Access Control Range], enter an IP address
that has access to the machine. To specify the IPv6 Address, in [Access Con-
trol Range] - [Range], enter an IP address that has access to the machine, or in
[Mask], enter an IP address that has access to the machine and specify the
[Mask Length].
F
Click [Apply].
Access control is set.
G
Log off from the machine.
Reference
For details, see the Web Image Monitor Help.
Preventing Unauthorized Access
5
103