Graco Reactor 2 Hydraulic Operation page 4

Warnings
SKIN INJECTION SKIN SKIN INJECTION HAZARD INJECTION
High-pressure luid from dispensing device, hose leaks, or ruptured components will pierce
skin. This may look like just a cut, but it is a serious injury that can result in amputation. Get
immediate surgical
immediate immediate
• Engage trigger lock when not spraying.
• Do not point dispensing device at anyone or at any part of the body.
• Do not put your hand over the luid outlet.
• Do not stop or delect leaks with your hand, body, glove, or rag.
• Follow the Pressure
checking, or servicing equipment.
• Tighten all luid connections before operating the equipment.
• Check hoses and couplings daily. Replace worn or damaged parts immediately.
FIRE AND FIRE FIRE AND AND EXPLOSION
Flammable fumes, such as solvent and paint fumes, in work
or solvent lowing through the equipment can cause static sparking. To help prevent ire and
explosion:
• Use equipment only in well ventilated area.
• Eliminate all ignition sources; such as pilot lights, cigarettes, portable electric lamps, and
plastic drop cloths (potential static sparking).
• Ground all equipment in the work area. See Grounding
• Never spray or lush solvent at high pressure.
• Keep work area free of debris, including solvent, rags and gasoline.
• Do not plug or unplug power cords, or turn power or light switches on or off when lammable
fumes are present.
• Use only grounded hoses.
• Hold gun irmly to side of grounded pail when triggering into pail. Do not use pail liners unless
they are anti-static or conductive.
• Stop Stop operation Stop operation immediately operation
equipment until you identify and correct the problem.
• Keep a working ire extinguisher in the work area.
4
WARNING
WARNING WARNING
HAZARD HAZARD
surgical treatment. treatment.
surgical treatment.
Pressure Pressure Relief Relief Procedure Relief Procedure when you stop dispensing and before cleaning, Procedure
EXPLOSION HAZARD EXPLOSION HAZARD HAZARD
immediately if static sparking occurs or you feel a shock. . . Do not use immediately
work area work area can ignite or explode. Paint area
Grounding instructions. Grounding
Get
Get
334945C