Adm Display Details; Navigating The Screens - Graco Reactor 2 Hydraulic Operation

Advanced Display Module (ADM)
ADM ADM Display ADM Display Details Display Details Details
Power Up Up Screen Screen
Power Power Up Screen
The following screen appears when the ADM is
powered up. It remains on while the ADM runs
through initialization and establishes communication
with other modules in the system.
Menu Bar Bar
Menu Menu Bar
The menu bar appears at the top of each screen.
(The following image is only an example.)
Date Date Date and and Time and Time Time
The date and time are always displayed in one of
the following formats. The time is always displayed
as a 24-hour clock.
• DD/MM/YY HH:MM
• YY/MM/DD HH:MM
• MM/DD/YY HH:MM
Arrows
Arrows Arrows
The left and right arrows indicate screen navigation.
Screen Menu Menu
Screen Screen Menu
The screen menu indicates the currently active
screen, which is highlighted. It also indicates the
associated screens that are available by scrolling left
and right.
System Mode Mode
System System Mode
The current system mode is displayed at the lower
left of the menu bar.
24
System Errors Errors
System System Errors
The current system error is displayed in the middle of
the menu bar. There are four possibilities:
Icon Function
Icon Icon Function Function
No Icon
No information or no error has occurred
Advisory
Deviation
Alarm
See Troubleshoot Errors, page 60
information.
Status Status Status
The current system status is displayed at the lower
right of the menu bar.
Soft Keys Keys
Soft Soft Keys
Icons next to the soft keys indicate which mode or
action is associated with each soft key. Soft keys
that do not have an icon next to them are not active
in the current screen.
NOTICE
NOTICE NOTICE
To prevent damage to the soft key buttons, do not
press buttons with sharp objects such as pens, plastic
cards, or ingernails.
Navigating the Navigating Navigating the Screens the Screens Screens
There are two sets of screens:
Run Screens Screens
• Run Run Screens control spraying operations and
display system status and data.
• Setup Setup Screens Setup Screens Screens control system parameters and
advanced features.
Press on any Run screen to enter the Setup
screens. If the system has a password lock, the
Password screen displays. If the system is not locked
(password is set to 0000), System Screen 1 displays.
Press on any Setup screen to return to the
Home screen.
Press the Enter soft key
function on any screen.
Press the Exit soft key
Use the other softkeys to select the function adjacent
to them.
for more
to activate the editing
to exit any screen.
334945C