Graco Reactor 2 Hydraulic Operation page 39

Home System Off Off
Home Home System System Off
This is the home screen when the system is off.
This screen displays actual temperatures, actual
pressures at the luid manifold, and number of cycles.
Home Home Home System System Active System Active Active
When the system is active, the home screen displays
actual temperature for heat zones, actual pressures
at the luid manifold, the number of cycles, along with
all associated control soft keys.
Use this screen to turn on heat zones, start the
proportioner, stop the proportioner, park the
component A pump, and clear cycles.
NOTE: NOTE: Screen shown displays inlet sensor NOTE:
temperatures and pressures. These will not be
shown on models without inlet sensors.
334945C
Advanced Display Module (ADM) Operation
Home System With With Error
Home Home System System With
Active errors are shown in the status bar. The error
code, alarm bell, and description of the error will
scroll in the status bar.
1. Press to acknowledge the error.
2. See Troubleshooting, page 41
action.
Targets Targets Targets
Use this screen to deine the setpoints for the
A Component Temperature, B Component
Temperature, heated hose temperature, and
pressure.
Maximum Maximum Maximum A A A and and and B B B temperature: temperature: 190°F (88°C) temperature:
Maximum Maximum heated Maximum heated heated hose hose temperature: hose
10°F (5°C) above the highest A or B temperature
setpoint or 180°F (82°C).
Note
If the remote display module kit is used,
these setpoints can be modiied at the gun.
Error
Error
for corrective
temperature: the lesser of temperature:
39