Mitsubishi Electric 800 Series Instruction Manual page 50

 Safety Supervisor Object (39h)
 Service
Class
Get Attribute Single
 Class attribute
No.
1 Revision
 Instance attribute
No.
11 Device Status
12 Exception Status
15 Alarm Enable
16 Warning Enable
25 Configuration UNID
26 Safety Configuration
Identifier
27 Target UNID
28 Output Connection Point
Owners
Number of Array Entries
Output Owners
OCPUNID
ePath Size
Application Resource
50
6. Safety Communication Functions
6.3 CIP Safety
Instance
Get Attribute Single
Set Attribute Single
Name Access
Get
Name Access
Get
Get
Set
Set
Get
Get
Get
Get
Type Value
UINT 0001h
Type Value
USINT -
BYTE Fixed to 0.
BOOL -
BOOL -
10 octets All fixed to
0xFF.
10 octets -
10 octets -
- -
UINT 01
ARRAY of -
STRUCT
10 octets -
USINT 05
Packed 20 04 25 8C
ePath 00h
Remarks
Revision of the object
Remarks
Inverter status
0: Undefined
1: Self-Testing
2: Idle
3: Self-Test Exception
4: Executing
5: Abort
6: Critical Fault
7: Configuring
8: Waiting for TUNID
Device diagnosis data
Do not set to a value other than "0".
The owner of the device setting is identified.
0: Not set. All owners are accepted.
0xFF set for all: Set via software only.
The SCID is read.
The TUNID is read.
-
Number of OCPUNID structure entries
-
UNID of the owner of the output resource.
0: Not owned. The owner is accepted (default).
Path size, number of bytes.
Path to the owner resource.