1.2 Standards and Regulations for Operating the 750 Series
Please observe the standards and regulations that are relevant to your
installation:
The data and power lines must be connected and installed in compliance
For installation, startup, maintenance and repair, please observe the
Emergency stop functions and equipment must not be made ineffective.
Your installation must be equipped in accordance to the EMC guidelines
Operating 750 Series components in home applications without further
Please observe the safety measures against electrostatic discharge
The relevant valid and applicable standards and guidelines concerning the
WAGO-I/O-SYSTEM 750
I/O-Modules
Standards and Regulations for Operating the 750 Series
with the standards to avoid failures on your installation and eliminate any
danger to personnel.
accident prevention regulations of your machine (e.g. BGV A 3,
"Electrical Installations and Equipment").
See relevant standards (e.g. DIN EN 418).
so that electromagnetic interferences can be eliminated.
measures is only permitted if they meet the emission limits (emissions of
interference) according to EN 61000-6-3. You will find the relevant
information in the section on "WAGO-I/O-SYSTEM 750" "System
Description" "Technical Data".
according to DIN EN 61340-5-1/-3. When handling the modules, ensure
that the environment (persons, workplace and packing) is well grounded.
installation of switch cabinets are to be observed.
Important Notes
• 7