Warranty - Gira System 3000 Operating Instructions Manual

System 3000
Presence and motion detector 360° top unit BT
Cause 3: Detection area is limited by push-on cover.
Check the push-on cover.
Device does not switch off
Cause 1: Interference sources in the detection field, device detects motions constantly.
Remove interference sources if possible.
Reduce sensitivity with the app.
Limit the detection field.
Cause 2: Timer ON or Continuous ON is activated.
Activate the automatic mode with the app.
Device does not react to operation with mobile end device, the blue LED does not light.
Cause 1: The mobile end device is not coupled with the device.
Couple the devices.
Cause 2: The Bluetooth interface on the mobile end device is not switched on.
Switch on the Bluetooth interface.
10 Conformity
Gira Giersiepen GmbH & Co. KG hereby declares that the radio system type art. no. 5377 02
meets the directive 2014/53/EU. You can find the full article number on the device. The com-
plete text of the EU Declaration of Conformity is available under the Internet address:
www.gira.de/konformitaet

11 Warranty

The warranty is provided in accordance with statutory requirements via the specialist trade.
Please submit or send faulty devices postage paid together with an error description to your re-
sponsible salesperson (specialist trade/installation company/electrical specialist trade). They will
forward the devices to the Gira Service Center.
Gira
Giersiepen GmbH & Co. KG
Elektro-Installations-
Systeme
Industriegebiet Mermbach
Dahlienstraße
42477 Radevormwald
Postfach 12 20
42461 Radevormwald
Deutschland
Tel +49(0)21 95 - 602-0
Fax +49(0)21 95 - 602-191
www.gira.de
info@gira.de
82599322 24.10.2019
13 / 13