Troubleshooting; Warranty - Gira 5373 Series User Manual

System 3000
Motion detector top unit 1.10 m Standard, Motion detector top unit 2.20 m
Standard
Degree of protection
System 55, Gira E22, Flächenschalter (F100)
TX44
Brightness setting
Sensitivity
Run-on time
Installation height
Order no. 5373 ..
Order no. 5375 ..
Detection angle
6

Troubleshooting

Motion detector does not switch on
Cause 1: The ambient brightness is greater than the adjusted brightness threshold.
Set brightness value (see Commissioning chapter).
Cause 2: Motion detector does not detect any motions.
Check detection area for any obstacles.
Motion detector switches on without motion
Cause: Motion detector detects heat motions.
Pay attention to interference sources such as heaters, fans, air-conditioners and cooling il-
luminants in the detection area.
Motion detector switches off despite motion
Cause: The ambient light is too bright and the switch-off threshold was exceeded.
Switch on motion detector.
Motion detector does not switch off after the set run-on time has elapsed
Cause: Motion detector detects motions constantly.
Pay attention to interference sources such as heaters, fans and air-conditioners in the de-
tection field.
7

Warranty

The warranty follows about the specialty store in between the legal framework as provided for
by law
Please submit or send faulty devices postage paid together with an error description to your re-
sponsible salesperson (specialist trade/installation company/electrical specialist trade). They will
forward the devices to the Gira Service Center. They will forward the devices to the Gira Service
Center.
32599602 10865947 04.05.2018
approx. 5 ... 1000 lx and day opera-
25, 50, 75, 100 %
1.10 m / 2.20 m
IP20
IP44
tion
approx. 2 min
1.10 m
180 °
8 / 9