Table of Contents
Advertisement
Motion detector top unit Standard
Order no. 5375 ..
Detection angle
6
Troubleshooting
Motion detector does not switch on
Cause 1: The ambient brightness is greater than the adjusted brightness threshold.
Set brightness value (see Commissioning chapter).
Cause 2: Motion detector does not detect any motions.
Check detection field for any obstacles.
Motion detector switches on without motion
Cause: Motion detector detects motions.
Pay attention to heat sources such as heaters, fans and air-conditioners in the
detection field.
Motion detector switches off despite motion
Cause: The ambient light is too bright and the switch-off threshold was exceeded.
Switch on motion detector.
Motion detector does not switch off after the run-on time has elapsed
Cause: Motion detector detects motions constantly.
Pay attention to heat sources such as heaters, fans and air-conditioners in the
detection field.
7
Warranty
The warranty is provided in accordance with statutory requirements via the specialist
trade. Please submit or send faulty devices postage paid together with a fault de-
scription to your responsible salesperson (specialist trade / installation company /
electrical specialist trade). They will forward the devices to the Gira Service Center.
Gira
Giersiepen GmbH & Co. KG
Elektro-Installations-
Systeme
Industriegebiet Mermbach
Dahlienstraße
42477 Radevormwald
Postfach 12 20
42461 Radevormwald
32599612
10870634
19.07.2023
1.10 m / 2.20 m
180°
13 / 14
Advertisement
Table of Contents
