System 3000
Relay switching insert 2-gang
Relay switching insert 2-gang
Order no.: 5404 00
Operating instructions
1
Safety instructions
Electrical devices may only be mounted and connected by electrically skilled persons.
Serious injuries, fire or property damage possible. Please read and follow manual fully.
Danger of electric shock. Always disconnect before carrying out work on the devise or load.
These instructions are an integral part of the product, and must remain with the end customer.
2
Intended use
–
Switching of lighting and motors
–
Mounting in appliance box according to DIN 49073
–
Operation with suitable cover
3
Product characteristics
Product characteristics
In combination with 2-gang push-button top
–
Two independent outputs
Time function for output a2 adjustable
–
–
Connection of extensions possible
In combination with 1-gang push-button top
–
Output a2 switches depending on output a1 e.g. to switch on ventilation, depending on
the lighting, and switch it off with a delay.
–
Switch-on delay of output a2 adjustable
Run-on time of output a2 adjustable
–
–
Connection of extensions possible
4
Operation with 2-gang push-button top
Switch load
–
Left: operation of output a1.
–
Right: operation of output a2.
■
Press push-button.
Output a1, a2 switches on and off.
Extension unit operation
Operation via 3-wire extension with 2-gang push-button top: Press top to switch on, press bot-
tom to switch off.
A 2-wire extension or push-button always switches both outputs.
Rotary dimmer extension only switches output a1.
Time function
If a time function is set for output a2 (see Setting the time function/run-on time), it switches off
after the set time has expired. The time function starts as soon as output a2 is switched on. To
terminate the time function prematurely, output a2 must be switched off manually.
The time function cannot be restarted by pressing again.
82401702
27.11.2018
1 / 6