Gira System 3000 Operating Instructions Manual page 6

System 3000
Presence and motion detector 360° top unit BT
Figure 3: Detection field: areas A, B and C; installation height 2.20 m
￭ Pay attention to correct alignment when mounting the appliance box and flush-mounted
insert.
￭ Align the cover so that the brightness sensor is on the side away from the windows. This
reduces the effects of scattered light.
Fitting the cover
￭ Connect flush-mounted insert properly and mount in accordance with the desired orienta-
tion of the cover (see instructions for flush-mounted insert).
￭ Fit the cover on the flush-mounted insert
￭ Switch on mains voltage.
If the red status LED flashes three times at repeated intervals, the cover was previously
connected to another insert. If the cover is to remain on the insert, press the Bluetooth
button (4) for longer than 4 seconds.
82599322
Figure 4: Arrangement of the areas A, B and C
24.10.2019
6 / 13