Gira System 3000 Operating Instructions Manual page 7

System 3000
Presence and motion detector 360° top unit BT
Limiting the detection field using the push-on cover
The push-on cover can be used to limit the detection field, e.g. in order to mask out interference
sources.
Size
Complete push-on cover
Area I cut out
Areas I + II cut out
without push-on cover
￭ Pull off push-on cover.
￭ Using scissors, cut out push-on cover along the marked lines as required.
￭ Push on push-on cover.
Alternatively, the detection field can also be limited via the app by reducing the sensitivity
or switching off individual sensors.
Expanding the detection field
To expand the detection field, connect a 3-wire extension with presence or motion detector
cover. The main device also evaluates signals of the extension and, if necessary, switches the
lighting on.
Configuring device settings
Settings are configured via the app
Default settings
Function
Operating mode
Operating mode
82599322
Figure 5: Push-on cover
24.10.2019
Range on the ground (mounting height 3 m)
Ø approx. 4.5 m
Ø approx. 7.5 m
Ø approx. 12 m
Ø approx. 20 m
Setting
Motion detector
Automatic operation
7 / 13