Gira System 3000 Operating Instructions Manual

System 3000
Flush-mounted DALI Power control unit insert
Flush-mounted DALI Power control unit insert
Order no.: 5406 00
Operating instructions
1 Safety instructions
Electrical devices may only be mounted and connected by electrically skilled persons.
Serious injuries, fire or property damage possible. Please read and follow manual fully.
Danger of electric shock. Always disconnect before carrying out work on the device or load. In
so doing, take all the circuit breakers into account, which support dangerous voltages to the
device and or load.
These instructions are an integral part of the product, and must remain with the end customer.
2 Intended use
– Switching and brightness setting for luminaires with DALI interface
– Setting the colour temperature for luminaires with DALI Device Type 8 for Tunable White
in accordance with IEC 62386-209
– Mounting in appliance box according to DIN 49073
– Operation with suitable cover
Since error-free interaction cannot be guaranteed in combination with other DALI controls,
it is thus not recommend.
Product characteristics
– DALI supply for a maximum of 18 DALI subscribers
– Parallel switching of up to 4 DALI control units with the option of supplying up to 72 DALI
subscribers
– Storing of minimum brightness, coldest and warmest colour temperature
– Switching on with the last set brightness/colour temperature or saved brightness/colour
temperature
– With 2-channel button cover: Adjustment of the colour temperature via right rocker
3 Operation
These instructions describe operation with a 1-channel button cover. Operation with different
covers is described in the instructions for the cover in question. Operation using 2-wire or 3-wire
extension essentially corresponds to operation on the main device.
With a 2-channel button cover, the left rocker works like the 1-channel button cover. The
right rocker is used to directly set the colour temperature.
Switching the light
￭ Brief press on the button cover: Light is switched on or off at the last set brightness/colour
temperature or a saved brightness/colour temperature.
￭ Long press on the button cover at the bottom: Light is switched on at minimum brightness.
Adjusting the brightness
￭ Long press the button cover at the top or bottom.
Setting the colour temperature
￭ Press the button cover in the switched-on state at the top, bottom or over the entire sur-
face twice within 0.4 seconds (double-click). The light switches off and on again.
￭ Long press the button cover at the top or bottom.
82598922 19.03.2020
1 / 6