Getting Help; Board Revisions - Rastergraf VFX-M User Manual

Rastergraf

Getting Help

This installation manual gives specific steps to take to install your
Rastergraf display board. There are, however, variables specific to your
computer configuration and monitor that this manual cannot address.
Normally, the default values given in this manual will work. If you have
trouble installing or configuring your system, first read Chapter 5,
"Troubleshooting". If this information does not enable you to solve your
problems, do one of the following:
1) call Rastergraf technical support at
2) fax your questions to
3) or send E-mail to
If your problem is monitor related, Rastergraf technical support will need
detailed information about your monitor.

Board Revisions

This manual applies to the following board revision levels:
VFX-M Fab Rev 0, 1
Introduction - 2
Artisan Scientific - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisan-scientific.com
(541) 923-5530,
(541) 923-6475,
support@rastergraf.com.