Table of Contents
Advertisement
Chapter 3
Installation
This is a customer setup unit. It is the customer's responsibility to install
this product.
Avoiding Drive Damage
on page 24
Unpack the Drive
on page 24
Verify the Shipment
on page 25
Inspect the Power Cord and Outlet
on page 25
Position the Tape Drive
on page 26
Install the SAS Host Adapter Card (if required)
on page 26
Connect the SAS Interface Cable
on page 26
Connect Power
on page 28
Run Drive Diagnostics
on page 29
Install Device Drivers
on page 29
Configure the Tape Drive to a Server/Host
on page 29
Updating firmware
on page 30
QuantumLTO-8 HH SAS User's Guide
23
- Quick Links:
- Function Code 3: Create Fup Tape
Hide quick links:
Advertisement
Table of Contents
