Table of Contents
Advertisement
Avoiding Drive Damage
Quantum LTO-5 HH SAS Model C User's Guide
This is a customer setup unit. It is the customer's responsibility to install
this product.
To avoid static electricity damage when handling the drive, use the
following precautions:
• Limit your movement. Movement can cause static electricity to build
around you.
• Always handle the drive carefully. Never touch exposed circuitry.
• Prevent others from touching the drive.
• Before unpacking and installing the drive into an enclosure, touch
its static-protective packaging to an unpainted metal surface on the
enclosure for at least two seconds. This reduces static electricity in
the packaging and your body.
• When possible, remove the drive from its static-protective
packaging and install it directly into an enclosure without setting it
down. When this is not possible, place the drive's packaging on a
smooth, level surface and place the drive on the packaging.
Chapter 3
Installation
21
Advertisement
Table of Contents
