Quantum LTO-8 HH SAS Technical Reference Manual page 35

Figure 5 Example of
connecting one SAS device
to the server
QuantumLTO-8 HH SAS User's Guide
To connect the cable:
1 Ensure the tape drive is powered OFF.
2 Since there are several types of SAS connectors, verify the SAS cable
has the correct connectors for the SAS host adapter and for the tape
drive.
3 The tape drive has two SAS ports and can be connected to two
servers, if desired. Refer to the appropriate figure that represents
your configuration for cabling information (see
Figure 6) and then connect the SAS cable(s) to SAS host adapter(s)
and to the tape drive as shown.
1 Tape drive
2 SAS connector
3 SAS cable
Chapter 3: Installation
Connect the SAS Interface Cable
Figure 5
4 SAS host adapter card
5 Server
and
27