3. Physical Features
3.1. Dimensions
W 55.0 x D 52.0 x H 20.0 mm
3.2. Weight
110 g (maximum, including cable)
3.3. Installation
Fixing screws: two M3 screws (when installing on one side only).
•
•
Screw holes: four holes (2 holes each on 2 sides)
•
•
Make sure that the screws do not come in any deeper than 3 mm inside the
scanner.
Refer to Chapter 17, "Mechanical Drawing" for the locations of the screw
holes.
Refer to Chapter 17, "Mechanical Drawing" for the locations of the screw
holes.
Tape up any of the screw holes that are not used for installation.
7
Opticon
NFT 2200
Specifications Manual