Krick Klemm L25-D Assembly Instructions Manual page 26

In the years around 1935, the Klemm 25 was by far and away the most popular sports aircraft in Germany.

This was made particularly apparent in 1935 itself, when no fewer than 111 of the 161 aircraft registered to

take part in the Deutschlandflug (a German competition for aircraft pilots) were Klemm 25s.

For many years now, the Klemm 25 has been one of the most popular construction kit models in the Krick

range. At the time, the focus was on correctly adapting this design to the latest production and construction

methods. Through the careful application of laser technology, all plywood and balsa wood components are

designed to produce a snap-fit construction that is both easy and self-explanatory to assemble. It is also a lot

of fun to put together, and the result is a beautiful and flawless structure that can be built quickly and without

special tools.

Technical information:

Scale:

Wingspan:

Length:

Weight:

Surface area:

Distributed load:

Any reprinting, including the reprinting of extracts, requires our express written approval.

Notes before building the model:

Tools & equipment: Building board, knife, wood file, fine saw, pins, clothes pegs, paper tape, parcel tape,

steel weights, cling film, white glue, 2K epoxy resin.

Adhesives: We recommend that you adhere all wood-to-wood connections using white glue only. Superglue

becomes brittle and is not strong enough when used with poplar plywood. For metal-to-wood connections, a

high-quality two-component adhesive, such as "UHU endfest 300", is the top choice.

1. Remove the parts from the laser plates.

The part numbers for each laser-cut part can be found on the laser plate right next to the part. The parts list

before each building section contains the number of the laser plate on which the part is located. Some parts

are found several times on different plates. Then you will see several plate numbers in the parts list sepa-

rated with "/" signs.

Only ever remove the parts from the laser plate immediately before using the part, as otherwise the part

number information may be lost. If you have previously removed a part, label it with the part number right

away using a soft pencil.

2. Upper panelling and lower panelling

Assembly instructions

Klemm L25-D

1:7

1,859 mm

1,071 mm

approx. 2,000 g

40.8 sq m

approx. 43 g/sq m