GISPY MOTH.
9) Set the aileron hatch in place and use a
Phillips screw driver to install it with four wood
screws.
16
Instruction Manual.
AILERON PUSHROD HORN INSTALLATION
50mm.
M3 clevis.
80mm.
Wing.
INSTALLING THE HORIZONTAL STABILIZER.
1) Using a ruler and a pen, locate the
centerline of the horizontal stabilizer, at the trail-
ing edge, and place a mark. Use a triangle
and extend this mark, from back to front,
across the top of the stabilizer. Also extend
this mark down the back of the trailing edge of
the stabilizer.
M3 lock nut.
M3 lock nut.
Aileron.