Control Panel; Menu Structure; Home" Menu - Grundfos MAGNA3 Installation And Operating Instructions Manual

9. Control panel

Warning
At high liquid temperatures, the pump housing
may be very hot. In that case, only touch the
control panel.
Fig. 19 Control panel
Button Function
Goes to the "Home" menu.
Returns to the previous action.
Navigates between main menus, displays and
digits.
When the menu is changed, the display will always
show the top display of the new menu.
Navigates between submenus.
Saves changed values, resets alarms and expands
the value field.

10. Menu structure

The pump incorporates a start-up guide which is started at the
first start-up. After the start-up guide, the four main menus will
appear in the display. See section 6. First start-up.
1. Home
This menu shows up to four user-defined parameters with
shortcuts or a graphical illustration of a Q/H performance curve.
Home
See section 11. "
" menu.
2. Status
This menu shows the status of the pump and system as well as
warnings and alarms. See section 12. "
Note
Note
No settings can be made in this menu.
3. Settings
This menu gives access to all setting parameters. A detailed
setting of the pump can be made in this menu.
Settings
See section 13. "
" menu.
4. Assist
This menu enables assisted pump setup, provides a short
description of the control modes and offers fault advice.
Assist
See section 14. "
" menu.

11. "Home" menu

Navigation
Home
Press to go to the "Home" menu.
"Home" menu (factory setting)
• Shortcut to control mode settings
• Shortcut to setpoint settings
Flow rate
•
Head.
•
Navigate in the display with or
shortcuts with or .
The "Home" display can be defined by the user.
Define Home display
See section 13.9.6
Status
" menu.
and change between the two
.
21