3. USING THE RECOVERY DVD TO RESTORE FACTORY SETTINGS
7. Once all drive restoration is completed using the recovery DVD, the following message is
displayed. Eject the recovery DVD from the DVD drive.
HJ-203**E*E* system recovery CONTINUE.
100%
COMPLETED.
Remove "HITACHI HJ-203**E*E* Product Recovery DVD"
from the DVD drive and restart HJ-203**E*E*.
8. Press the power switch to cut power to HF-W, and then press it again to turn power back
on.
The HF-W2000 model 35/30 system drive has been restored to factory settings using the
recovery DVD. Perform the procedures shown in "CHAPTER 1 SETUP PROCEDURES
FOR INITIAL POWER-ON" to set up the OS.
3-6