Hitachi HF-W2000 35 Setup Manual page 41

3. USING THE RECOVERY DVD TO RESTORE FACTORY SETTINGS
4. If the [y] key is pressed, a message confirming whether to change boot partition capacity is
displayed.
In case of the S model (SATA-SSD model) of the HF-W2000 model 35/30, drive
restoration is started, and the progress is displayed (skip to step 6).
*******************************************************
This recovery program deletes all personal data and
your customized configuration settings. It resets
HJ-203**E*E* to the factory-shipped default values.
Be sure to back up your personal files before you use
this DVD.
******************************************************
continue?
(Yes[y]/No[n]):y
Do you change the size of boot partition?
In case of "No", it is set to the default size (NNN MB).
(Yes[y]/No[n]):
If the [n] key is pressed, a message confirming whether to restore the boot partition with the
same capacity (NNN MB) as the factory settings is displayed.
(Yes[y]/No[n]):n
Set the boot partition size to NNN MB.
Continue?
(Yes[y]/No[n]):
If the [y] key is pressed, drive restoration is started, and the progress is displayed (skip to
step 6).
If the [n] key is pressed, the following message is displayed, and the change of boot
partition capacity is canceled. Press the power switch to cut power to HF-W.
(Yes[y]/No[n]):n
System recovery process is canceled.
Attention
3-4