Chapter 2 Basic Settings After Os Setup; Windows® Xp Basic Settings; Overview Of Basic Settings Procedures - Hitachi HF-W2000 35 Setup Manual

CHAPTER 2 BASIC SETTINGS AFTER OS SETUP

This chapter explains the following settings procedures.
• Basic settings procedures after OS setup
Perform these procedures as needed after OS setup.
Pre-installed OS
Windows® XP Professional
Windows® 7 Professional
2.1 Windows® XP Basic Settings
This section shows the basic settings procedures for pre-installed Windows® XP Professional.
Perform these procedures as needed after OS setup.

2.1.1 Overview of basic settings procedures

Screen settings
Network environment settings
DVD drive settings (for DVD multi-
drive implementations)
Hard disk formatting
See "2.1 Windows® XP Basic Settings" and perform each appropriate
setting.
See "2.2 Windows® 7 Basic Settings" and perform each appropriate
setting.
See "2.1.2 Screen settings."
• Set the screen resolution and screen colors.
• The required time is roughly 3 minutes.
See "2.1.3 Network environment settings."
• The required time is roughly 10 minutes.
See "2.1.4 DVD drive settings (for DVD multi-
drive implementations)."
• These settings are performed only for DVD multi-
• The DVD drive settings are changed to allow
• The required time is roughly 3 minutes.
See "2.1.5 Hard disk free space formatting."
• The formatting time differs depending on the size
2-1
2. BASIC SETTINGS AFTER OS SETUP
Description
drive implementations.
writing to DVD-RAM.
of the partition to be formatted.