Table of Contents
Advertisement
AT Command Set Operation
S-Registers (continued)
S n
Retransmit counter
Transmit level
S100
S Register Help
S$
DSR operation
&S n
Password operation
%S n
%S11
%S16
%S17
060R122-000
Issue 15
Controls the S-Registers which store values for functions that are not often changed.
Stores and determines how many times (0-255) the modem will retransmit any one
S70
frame when noise is disrupting the reception of a frame and causing data errors. The
modem hangs up after it has retransmitted up to the counter limit. The default is 100.
Use higher limits only when telephone lines are extremely noisy. In such conditions,
although the connection delay may be undesirable, the modem will not hang up
prematurely.
Only configurable in those countries, such as the United States, that do not limit
transmit level selections
When you issue the command
transmit level configured in the modem.
Displays the S-Register Help Menu
Controls how the Data Set Ready EIA interchange circuit will operate. The
command overrides the functionality of this command during any
&S0
Selects DSR to remain On and glitch Off for disconnect.
Causes DSR to be real (per ITU-T).
&S1
&S2
Selects DSR to follow carrier detect.
Selects DSR forced On in all modes.
&S3
Selects what type of password security the modem will enforce. Refer to
Overview
for detailed information on combining security commands/options.
%S0
Disables password security.
Enables SteadFast security in the modem. During the handshake, the originate GDC
%S1
modem transmits its cell 0 password; the answer GDC modem attempts a match with
its cell 0 password.
%S2
Enables Online Security in the modem. The answer modem prompts the remote for a
cell password and attempts a match with passwords in cells 0 - 9.
If RADIUS Security is used, this command enables RADIUS. The passwords are
stored in the RADIUS server. Refer to the SCM MAnual, Appendix B for details.
For any modem function that uses
S2=128
modem for
.
%S3
Enables both SteadFast and Online Security.
Enables SteadFast Security with mandatory callback. Pass-through security is
%S4
disabled.
Enables Online Security with manadatory call-back.
%S6
Enables SteadFast Security and Online Security with mandatory call-back.
%S7
Enables AES Encryption only.
%S8
Enables AES Encryption and SteadFast Security.
%S9
Enables AES Encryption, SteadFast Security and RADIUS.
Enables SAM Authentication only.
Enables SAM Authentication and SteadFast Security.
%S8
%S9
%S11
For
,
, and
For
%S16
and
%S17
, you must also configure SAM parameters (see
SpectraComm Dual V.34 Modem
Installation and Operation
AT Command Reference Tables
S100?
the value displayed in this register is the
%S2
, it is strongly recommended to option the
, you must also configure an encryption key (see
%D n
ANALOOP
test.
Security
%X1).
%Xn).
4-17
Advertisement
Table of Contents
