Table of Contents
Advertisement
Operation
6. Type AT&L0 and press Enter to place the unit into switched line mode so that it does not
retrain. As long as the unit you are working with remains in switched line mode, the modem at
the far end of the private line continues unsuccessful attempts to retrain. (This step extends the
time available for inputting AT commands.)
7. Configure the modem as required by typing AT commands just as you would from the DTE.
When complete, check the AT% option settings again to be sure that %O is set correctly.
8. Type the &L1 command to restore the unit to private line mode.
9. If you intend to save the configuration as a User Profile (&W command) do so immediately
after restoring the unit to private line mode.
10. Type AT< and press Enter. If the unit has not completed retraining, it returns to the Main
Menu screen. If the unit has reconnected and there is no response, type AT< and press
Enter to return to the Main Menu.
3-42
SpectraComm Dual V.34 Modem
Installation and Operation
Modem Main Menu
060R122-000
Issue 15
Advertisement
Table of Contents
