Controller Interface - Mitsubishi Electric AE-200A Instruction Book

2-5. Controller interface

Important
● Before using the controller, remove the protective sheet on the cover to avoid the sheet from sticking to the touch panel and
causing malfunctions.
● Use the supplied L-shaped driver to remove or attach the cover.
USB port
Power
ON/OFF
LED
Status
LINK/ACT1
LINK/ACT2
ON/OFF
Push switch
Reset
USB port
WT07992X02
Item
Lit in green
Unlit
Lit in green
Blink in green
Unlit
Blink in orange
Blink in blue
Blink in pink
Blink in orange
Blink in orange
Display/Touch panel
When the backlight is off, touching the panel turns the backlight on,
and it will stay lit for three minutes. The backlight stays lit while an
error is occurring.
Power ON
Power OFF
One or more air conditioning units are ON.
One or more air conditioning units or other related equipment
are in error.
All air conditioning units are OFF.
Startup failed
Software update in progress
Software update failed
Data transmission in progress (LAN1)
®
BACnet data transmission in progress (LAN2)
Used to turn the connected air conditioning units and the other
related equipment ON and OFF all at once.
Used to reboot the AE-200/AE-50. (This will not affect the
operation status of the air conditioning units.)
Used when the settings data is backed up to or imported from
a USB memory device, when the energy management data is
output in a CSV format to a USB memory device, and when the
software needs to be updated.
8
Power
LINK/ACT1
ON/OFF
LINK/ACT2
Status
Push switch
Description